Marcotta Outdoor Solutions - Commercial Terracotta Tiles - Quality Terracotta Tiles, Pavers and much more !

Gallery

Commercial Terracotta Tiles

Designed for commercial to light industrial applications

Our commercial terracotta tiles are an unglazed, homogeneous, extruded tile which has been designed and manufactured to combine pleasing appearance with superior technical characteristics. It has been developed with specific emphasis on chemical resistance and performance in high foot traffic areas.

Technical specifications begin with an all-important Water Absorption rating of 3% or less and it passes all international standards for acid-resistant floor tile. It is fade-proof, fire-proof, dent proof; and is resistant to oils, acids, detergents, chemicals, frost, mould and salt attack.

Ideal for commercial and light-industrial applications they are well suited for use in commercial kitchens, restaurants, shopping centers, pathways, factories, railway stations, sports stadiums, commercial swimming pools and food processing plants where their natural slip resistant, tough, unglazed surface allows easy maintenance.

Available colours


ADOBE	BRONZE	CLOUD	LAVA	EBONY	HEATHER	KISTIN

SLIP resistant (R11) • FROST resistant • STAIN resistant • ACID resistant

Please note: Colours are indicative only and do vary from batch to batch. Actual current tile samples should be used for final colour selection.

Carbgrip Surface

The CarbGrip surface is achieved by impregnating the standard tile with carborundum (silicon carbide) early in the manufacturing process. Not available in colors Ebony and Heather. The resulting slip resistance is R13 instead of the standard R11. Wear Resistance also increases significantly.
	200 x 200 mm	Close-up

Standard Sizes


*12	*8	*6	*6

* Recommened grout gap in mm
The entire commercial range is available on request for quantity orders only. Orders are required 8-12 weeks prior to delivery date to be secured with a pre-arranged deposit.
15 mm thick

Standard Accessories

Roundedge	Safety Roundedge

Steptread	Safety Steptread

Corner Steptread	Skirting

Cove

Main Technical Properties (range average)

Water Absorption (ISO 10545 - 3)	≤ 6%
Scratch Hardness (BS 6431 Part 13)	MOH’s 7
Frost Resistance (ISO 10545 – 12)	Pass
Salt Safe (AS1226.10)	Pass
Chemical Resistance (ISO10545.13)	Pass
Slip Resistance (Oil-Wet Ramp Test to SS 485-2001)	R11

IMPORTANT INSTALLATION POINTS

The following points must be observed to achieve the best aesthetic and technical floor or paving result:

During installation take tiles randomly from two or three packs.

Follow the recommended grout gaps shown on the label of the tile pack.

When installing square tiles ensure that underside fixing ribs are running in the same direction whenever possible.

Flexible 10 mm expansion joints should be installed along restrained perimeters of the installed area, around rigid interruptions, above substrate construction joints, and every 4 to 5 meters across any continuous expanse of floor or paving; or follow local standards when available.