 |
|
Designed for residential and commercial applications
Marcotta's New Age terracotta tiles are made using 100% natural blended clays. The result is traditional terracotta aesthetics, extraordinary durability, maximized safety and dimensional accuracy.
Meeting or exceeding all international standards, their visual appeal is well supported by resistance to stains, chemicals, salt, frost, slip and wear, both indoor and outdoor.
Ideal for residential, multi-residential, and light commercial projects, they are particularly suitable for verandas, patios, pool and spa surrounds, family rooms, pathways, driveways, balconies, staircases and steps, garages, and almost anywhere that a hard-wearing, slip resistant, wet or dry surface is required. |
 |
 Colours available in stock
|
|
|
|
|
|
|
|
COTTO
|
BURGUNDY
|
CARAMEL
|
EVENING
SHADE
|
SALTILLO
|
SAHARA
|
Other colours available for quantity orders
|
|
|
|
|
|
|
|
CHESTNUT
|
ISOLA
|
MOCHA
|
COSTA
BRAVA
|
HEATHER
BLEND
|
PINOT
FLASH
|
SLIP resistant (R11) • FROST resistant • STAIN resistant • SALT Reistant
Please note: Colours are indicative only and do vary from batch to batch. Actual current tile samples should be used for final colour selection.
Standard Sizes
* Recommened grout gap in mm
^ Stocked item. All other sizes available on request for quantity orders
14 mm thick
Standard Accessories
|
Steptread
|
Round Edge
|
|
|
|
|
|
|
|
Sizes: 400L x 360D
300L x 360D ^
195L x 360D
|
Sizes: 400L x 400D
300L x 300D ^
195L x 195D
195L x 300D
150L x 150D
|
| ^ Stocked item. All other sizes available on request for quantity orders |
|
Main Technical Properties (range average)
| Water Absorption (ISO 10545 - 3) |
≤ 6% |
| Scratch Hardness (BS 6431 Part 13) |
MOH’s 6 |
| Frost Resistance (ISO 10545 – 12) |
Pass |
| Salt Safe (AS1226.10) |
Pass |
| Chemical Resistance (ISO10545.13) |
Pass |
| Slip Resistance (Oil-Wet Ramp Test to SS 485-2001) |
R11 |
|
IMPORTANT INSTALLATION POINTS
The following points must be observed to achieve the best aesthetic and technical floor or paving result:
|
1.
|
During installation take tiles randomly from two or three packs. |
| 2. |
Follow the recommended grout gaps shown on the label of the tile pack. |
| 3. |
When installing square tiles ensure that underside fixing ribs are running in the same direction whenever possible. |
| 4. |
| Flexible 10 mm expansion joints should be installed along restrained perimeters of the installed area, around rigid interruptions, above substrate construction joints, and every 4 to 5 meters across any continuous expanse of floor or paving; or follow local standards when available. |
|
|
|
 |
